Skip Navigation Website Accessibility
 

XS Scuba Pressure Gauge Combo Console

   
Quantity:    

Add to Cart
  • Pressure Depth Gauge Console with Slate

  • Boot Equipped with Attachment Points

  • Luminescent Gauge Faces

  • Color Coded Gauge Faces for Safety

  • Depth Gauge: Maximum Depth Indicator Needle (MDIN)

  • MDIN:

    Extremely Handy for Logging Dive Information

    Follows Depth Needle to Deepest Point Reached on Dive

    Marks Maximum Depth Reached

  • Color Coded for Safety: 130' to 200' Depths Beyond Sport Diving Limits

  • 7/16" Threaded 36" (91.4 cm) High Pressure Hose

XS Scuba's Combo Console is a low profiled and ergonomically designed to fit in the hand comfortably, and is easy to read at a glance with its outstanding graphics. The Combo Console has an air-filled steel diaphragm depth gauge with a 0' to 200' readout and maximum depth indicator needle (MDIN). The MDIN is pushed by the gauge depth needle until the diver meets their maximum depth. The MDNI will remain at the maximum depth reached for the duration of the dive to indicate the diver's deepest depth reached during the dive. This feature allows the diver to not record that depth while diving, yet will be available upon surfacing for later calculations for repetitive dives. The colored graphics allow quick glance monitoring with bright red depth indicators at strategic positions on the gauge face. The red indicators are at depths beyond the standard sport limits of 130' to 200'. Gauge face is luminescent for low light and night diving conditions.

Pressure Gauge is a highly accurate bourdon tube design, reads pressure up to 5000 psi and features a thermometer for temperature readings. Like the depth gauge, the SPG has high visibility graphics with bright red from 0 to 500 psi reserve air and the gauge face is also luminescent. Pressure gauge comes with a 36" (91.4 cm) high pressure hose

Both gauges are packaged in a noncorrosive thermoplastic boot that is impact resistant and durable. Console boot has a sleek low profile with attachment points on both sides for a lanyard or clip. Both the depth and pressure gauges are mount on the front of the boot and on the backside, the boot has a small round writing slate for communications. If you wish to add navigation to your console the slate can be removed and replaced with a compass module.



Order Today 614-948-3481
CONTACT US
  • Captain Rick's
  • store@captainricksscuba.com
  • 614-948-3481
  • 760 South State Street
    Westerville, OH 43081
  • Monday - Saturday 11am - 7pm
    Sunday 12pm - 6pm